Aanvullende informatie
| AP | |
|---|---|
| d1 | |
| d2 | |
| l1 | |
| l2 | |
| l3 | |
| Aansluitdiameter mm (d) | |
| Aanzet (F/min) | |
| Aanzet (F/omwenteling) | |
| Aanzet (Fz in mm) | |
| Aanzet mm/omw. | |
| Afbramen, circulair frezen (Fz in mm) | |
| Afbramen (Fz in mm) | |
| Afbramen (N/min) | |
| b | |
| BSPT | |
| bxd | |
| D | |
| d Inch | |
| D = max | |
| d | |
| d3 | |
| Df | |
| Diameter boring mm (D) | |
| Diepte | |
| EF | |
| ER | |
| fz nafrezen (Fz in mm) | |
| fz voorfrezen (Fz in mm) | |
| G (55°) BSF, BSP | |
| h | |
| hmax. | |
| I | |
| If | |
| Kantfase mm (SF) | |
| L | |
| M | |
| Materiaalklassificatie (ISO) | |
| MF | |
| MJ | |
| NPS | |
| NPSF | |
| NPT | |
| NPTF | |
| Omtrekfrezen (Fz in mm) ae ≤ 1,0xD | |
| Omtrekfrezen (Fz in mm) ae ≤ 0,1xD ẞ ≤ 38° | |
| Omtrekfrezen (Fz in mm) ae ≤ 0,1xD ẞ ≤ 36,9° | |
| Omtrekfrezen (Fz in mm) ae ≤ 0,05xD ẞ ≤ 26° | |
| Omtrekfrezen (Fz in mm) ae ≤ 0,05xD ẞ ≤ 25,8° | |
| Omtrekfrezen (Fz in mm) ae ≤ 0,075xD ẞ ≤ 31,8° | |
| Omtrekfrezen (Fz in mm) ae ≤ 0,5xD ẞ ≤ 90° | |
| Omtrekfrezen (Fz in mm) ae ≤ 0,4xD | |
| Omtrekfrezen (Fz in mm) ae ≤ 0,3xD | |
| Omtrekfrezen (Fz in mm) ae ≤ 0,25xD | |
| Omtrekfrezen (Fz in mm) ae ≤ 0,25xD ẞ ≤ 60° | |
| Omtrekfrezen (Fz in mm) ae ≤ 0,15xD ẞ ≤ 45,6° | |
| Omtrekfrezen (Fz in mm) ae ≤ 0,15xD ẞ ≤ 36,9° | |
| P | |
| pg | |
| Plaatgrootte (mm) | |
| Type | |
| Sleuffrezen (Fz in mm) ap ≤ 1.0 xD | |
| Sleuffrezen (Fz in mm) ap ≤ 0,1 xD | |
| Sleuffrezen (Fz in mm) ap ≤ 0,2 xD | |
| Sleuffrezen (Fz in mm) ap ≤ 0,5 xD | |
| Sleuffrezen (Fz in mm) ap ≤ 1,5 xD | |
| Sleuffrezen (Fz in mm) ap ≤ 2,0 xD | |
| Snijdiameter max. mm (D) | |
| Te bewerken materiaal | |
| Toerental (N/min) | |
| TPI | |
| trapezium | |
| type | |
| Uitsteeklengte mm (l2) | |
| un-unc-uns-unf-unef | |
| UNC | |
| UNEF | |
| UNF | |
| UNJC | |
| UNJF | |
| Whitworth BSF | |
| Whitworth BSW | |
| Z | |
| trapeziumpa_trapezium |